Western Digital Ultrastar Data60 Manual page 11

EcoDesign Disclosures
Figure 4: Strap-Style Cable Retention
c. Power down the enclosure by disconnecting both power cables, one from each PSU.
Removing the Cables
Step 3 : Disconnect the HD Mini-SAS cables from the rear of the enclosure by pulling (don't jerk) on the
blue tab that is extending outward from the connector. This will free the cable from the port. Make
sure each cable is labeled or label them yourself to ensure that they will be plugged back into the
same location.
Step 4 : Unplug the Ethernet cables from the out-of-band management ports.
Step 5 : Uncable the CMA(s).
a. Open all of the basket clips on the CMA(s).
Figure 5: Open Baskets
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
arm.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
7