Western Digital Ultrastar Data60 Manual page 12

EcoDesign Disclosures
Removing the CMA(s)
Step 6 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
There are three total connections that need to be released, one at the elbow and two at the
opposite end.
b. To release a connector, press the blue latch release button and pull the connector free.
Figure 6: Unlatching a CMA Connector
Removing the Crossbar
Step 7 : Uninstall the crossbar from the CMA mounting bracket.
a. Locate the crossbar thumbscrew that secures the crossbar to the CMA mounting brackets
and unscrew it.
Figure 7: Unscrew Thumbscrew
b. Swing the crossbar away from the enclosure.
1. EU EcoDesign Disclosures
1.4 Ultrastar Data60 Disassembly
8