Wireless Settings - KVH Industries TracPhone V11 HTS User Manual

Wireless Settings

With Wi-Fi enabled, vessel devices can connect to the ICM via its built-
in wireless access point (WAP) and receive IP addresses from the ICM
via DHCP.
Important!
The range of the ICM's WAP will depend on the layout and structure
of the vessel. For example, wireless signals degrade when passing
through bulkheads and near metal masses. If the system is installed
on a steel vessel, you might need a special WAP and the services of a
technician with advanced networking expertise.
Figure 7-15 Wireless DHCP (Example)
ICM
NOTE: If the optional CommBox software is enabled, the Network Settings
page of the ICM/mini-VSAT Manager will not contain any configurable
fields.
To enable and configure the ICM's Wi-Fi connection, follow these
steps:
1. At the TracPhone V11-HTS web interface, click the Settings
tab. Then click Network Settings.
NOTE: You can also change the ICM's Wi-Fi settings at the mini-VSAT
Manager (www.mykvh.com). Go to the ICM > Network Configuration
section of the Vessel Details page and select Wi-Fi Settings.
2. In Wireless Settings, click Edit.
3. If the Login window appears, log in with the Administrator
password.
Mobile
Devices
192.168.6.102
192.168.6.103
Wi-Fi
TracPhone V11-HTS User's Guide
Network Configuration
83