KVH Industries TracPhone V11 HTS User Manual page 81

TracPhone V11-HTS User's Guide
Network Configuration
84
4. Set the following wireless options:
State: Select On.
SSID: Enter a unique name for the vessel network.
Protocol: Select either 802.11b or 802.11g.
Security: Select either security type – WPA2 or WEP (128-bit).
Password/Passphrase: If you selected WPA2, enter a password
(between 8-20 characters). If you selected WEP, enter a passphrase
(must be 13 characters).
Channel: Keep the default, or select any channel for wireless
.
communications
Important!
Failure to apply security settings will make your vessel's wireless
network vulnerable to outside intrusion.
Figure 7-16 Wireless Settings
5. Click Save.
6. At the confirmation message, click Save.
7. Make sure your computers are equipped with a wireless
network interface card and configured for DHCP addressing
(see "Configuring Computers for DHCP" on page 85).