KVH Industries TracPhone V11 HTS User Manual page 120

TracPhone V11-HTS User's Guide
Troubleshooting
126
No. Description
241 Error: The antenna's main board detects a power failure.
Contact KVH.
243 Error: The antenna's C-band BUC is not receiving the
required 10 MHz reference signal from the ICM. Check the
transmit (TX) RF cable.
244 Error: The antenna's main board has lost communications
with the BUC. Contact KVH.
245 Error: The antenna's main board is unable to configure the
BUC. Contact KVH.
246 Error: There is an open circuit in the LNB power wiring, or
the antenna's LNB might be faulty – contact KVH.
247 Error: There is a short circuit in the LNB power wiring, or
the antenna's LNB might be faulty – contact KVH.
248 Error: The antenna's LNB is not receiving the required 10
MHz reference signal from the power/thermal module.
Check the power/thermal module connectors.
249 Error: The internal temperature of the antenna's SSPA
(solid state power amplifier) exceeds acceptable limits.
Turn off the system and allow it to cool. If the problem
persists, the SSPA might be faulty. Contact KVH.
250 Error: The antenna's main board has lost communications
with the power/thermal module. Contact KVH.
251 Error: The antenna's main board is unable to configure the
power/thermal module. Contact KVH.
252 Warning: The internal temperature of the antenna's
power/thermal module is outside the normal range. Turn
off the system and allow it to cool. If the problem persists,
the power/thermal module might be faulty. Contact KVH.
253 Warning: The internal temperature of the antenna's BUC is
outside the normal range. Turn off the system and allow it
to cool. If the problem persists, the BUC might be faulty.
Contact KVH.
254 Warning: The internal temperature of the antenna's LNB is
outside the normal range. Turn off the system and allow it
to cool. If the problem persists, the LNB might be faulty.
Contact KVH.