KVH Industries TracPhone V11 HTS User Manual page 118

TracPhone V11-HTS User's Guide
Troubleshooting
124
No. Description
200 Warning: The antenna is not receiving adequate DC power
from the ICM (this DC voltage must be present to enable
the antenna's AC power circuit). Check the data cable and
the wires on the back of the ICM.
202 Error: The antenna's main board has lost communications
with the skew and cross-azimuth motors. Contact KVH.
203 Error: The antenna's main board has lost communications
with the azimuth and elevation motors. Contact KVH.
204 Error: The antenna's main board has lost RF
communications. Try updating the software (see
Updates" on page
205 Error: The antenna's azimuth motor has a power failure.
Contact KVH.
206 Error: The antenna's azimuth motor or limit switch failed.
Contact KVH.
207 Error: The antenna's elevation motor has a power failure.
Contact KVH.
208 Error: The antenna's elevation motor or limit switch failed.
Contact KVH.
209 Error: The antenna's main board has lost communications
with the sensor module. Contact KVH.
210 Error: The antenna's sensor module failed. Contact KVH.
211 Error: The antenna's sensor module has a power failure.
Contact KVH.
212 Warning: The internal temperature of the antenna's sensor
module exceeds acceptable limits. Turn off the system and
allow it to cool. If the problem persists, the sensor module
might be faulty. Contact KVH.
213 Warning: The antenna's sensor module failed. Contact
KVH.
214 Warning: The antenna's sensor module failed. Contact
KVH.
215 Error: The antenna's cross-azimuth motor has a power
failure. Contact KVH.
153).
"Software