Table of Contents
Advertisement
[Description] Whether to perform automatic print head check
[Values to be printed]
OFF: Not performed.
ON:
Performed.
WEB PRINTER [ ]
[Description] Whether to use the printer as a web printer
[Values to be printed]
OFF:
ON:
RIBBON NEAR END [ ]
[Description] Ribbon near end detection
[Values to be printed]
OFF:
Disabled.
30m:
Ribbon near end status is detected when the remaining ribbon length is approximately 30 m.
70m:
Ribbon near end status is detected when the remaining ribbon length is approximately 70 m.
EX. I/O MODE [ ]
[Description] Expansion I/O operation mode
[Values to be printed]
TTEC Standard: Standard mode
Inline:
PAPER/RBN END [ ]
[Description] Printer behavior at label/ribbon end
[Values to be printed]
Stop immediately: When a label/ribbon end status is detected, the printer stops immediately.
Complete current: When a label/ribbon end status is detected, the printer prints the current label as far
MAXICODE SPEC. [ ]
[Description] Maxicode specification
[Values to be printed]
TYPE1: Compatible:
TYPE2: Special Spec: Special specification
XML [ ]
[Description] XML data printing
[Values to be printed]
OFF:
STD:
ORACLE:
SAP:
ENERGY TYPE (T) [ ]
[Description] Energy level applied to the print head in thermal transfer mode
[Values to be printed]
NORM:
HIGH: :
LOW::
rsv1: (Reserved1):
rsv2: (Reserved2):
rsv3: (Reserved3):
rsv4: (Reserved4):
rsv5: (Reserved5):
rsv6: (Reserved6):
rsv7: (Reserved7):
ENERGY TYPE (D) [ ]
[Description] Energy level applied to the print head in thermal direct mode
Not used.
Enable
In-line mode
as possible, and then stops.
Compatible with the current version
Disabled.
Standard specification
Specification for Oracle
Specification for SAP
General-purpose
High
Low
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
59
Advertisement
Table of Contents
