Table of Contents
Advertisement
8.17.1.1 System mode and user system mode start screen when password is enabled
When the password is enabled, the password entry screen is displayed at the time the system mode or user
system mode is started.
Password entry for system mode
Display
When a wrong password is entered or the [FEED] key or [RESTART] key is pressed
A wrong password was entered for 3 times consecutively.
Password entry for user system mode
Display
When a wrong password is entered or the [FEED] key or [RESTART] key is pressed
A wrong password was entered for 3 times consecutively.
Note:
If you forgot the system mode password, disable it with @010 command
Procedure
Turn on the printer while holding down the [FEED] and [RESTART] keys at
the same time.
The password entry screen is displayed.
Enter the password.
The printer enters the system mode.
Password invalid message is displayed.
The printer starts in online mode.
Procedure
Turn on the printer, press the [PAUSE] key to place the printer in pause
state. Then, hold down the [RESTART] key for 3 seconds.
The password entry screen is displayed.
Enter the password.
The printer enters the user system mode.
Password invalid message is displayed.
The printer locks. Turn off printer and back to on.
134
Advertisement
Table of Contents
