Table of Contents
Advertisement
7.3 SENSOR ADJUSTMENT SCREEN
The sensor adjustment screen is used only when the level of the media sensors on the printer is required to be
adjusted.
It is comprised with the following :
Display example
Message
Before adjustment
After adjustment
Key function (before adjustment)
Substitute Key
[PAUSE]
[FEED]
[RESTART]
Key function (after adjustment)
Substitute Key
[PAUSE]
[FEED]
[RESTART]
Notes:
1. The symbol "*" shown on the right side of the adjustment value indicates the completion of adjustment.
2. The voltage value being selected is updated approximately every 200 msec. interval.
REFLECTIVE SENSOR
4.3V
Set a blank label
[ENTER] for 3sec
Displays the upper-level menu.
When held down for 3 seconds or more, the sensor adjustment
is performed.
When this key is released within 3 seconds, the screen returns
to the upper-level menu.
No function
Displays re-adjustment menu.
No function
No function
46
Title
Sensor level
Display
REFLECTIVE SENSOR
4.3V
Set a blank label
[ENTER] for 3sec
REFLECTIVE SENSOR
4.5V *
Adjust Complete
Function
Function
Advertisement
Table of Contents
