Table of Contents
Advertisement
The following message is displayed depending on the module type setting, the mounted module type, and the
module mount condition.
Module Type
parameter
NONE
No module installed.
U4
No module installed.
BA704-RFID-U4-S
BA704-RFID-U4-KR-S
BA704-RFID-U4-EU-S
BA704-RFID-U4-AU-S
preinstall model
*1: Selectable country codes differ depending on the RFID module type. Multiple country codes may be
displayed when setting a country code, but be sure to select the country where the RFID module is used.
Setting a different country code is prohibited.
For the selectable country codes, refer to Section 9.4.2.1 Module version and LCD message.
8.10.2.3 TAG
Selectable tag types vary according to the module setting.
The number in the table indicates the scroll line number.
NONE
EPC C1 Gen2
8.10.2.4 RF CHANNEL
A channel used for RFID tag write is set.
・ AUTO
・ 2CH
・ 3CH
・ 4CH
・ 5CH
・ 6CH
・ 7CH
・ 8CH
Notes:
1. When a channel is chosen from 2CH to 8CH, that channel will be continuously used.
2. When the channel is set to AUTO, an available channel is searched in the following order:
(2CH 8CH 6CH 4CH 3CH 7CH 5CH 2CH)
3. : The frequencies used as follows.
Channel
Frequency (MHz)
Module type and status
U2/U4
1
2
2CH
3CH
4CH
921.0
921.2
921.4
NONE
No RFID Module
No country
Need Setting for use
setting
[PAUSE] for Setting
5CH
6CH
7CH
921.6
921.8
922.0
119
Message
8CH
922.2
Advertisement
Table of Contents
