VOID PRINT TAGS
<< RTC >>
Item
BATTERY CHECK
RENEWAL
Settings not printed on the maintenance counter/parameter setting data printout
User system mode:
<5>SHOW ISSUE COND.
Item
(Note)
Sensor
Mode
Print Speed
(Note)
Ribbon
Direction
(Note)
Media pitch
Print length
Print width
Media width
Note: Though the setting value is reset to the initial value by a parameter clear, the first online operation
after a parameter clear is performed based on the value set with the initial setting wizard.
8.8.4 INITIAL SETTING
When Printer do RAM Clear(except JA), printer will show initial setting wizard.
1.After Parameter Clear
Number of times data write failed
Description
Battery check
Time update timing
(RAM Clear QM Type)
QM TYPE
CLEAR...
↓
QM TYPE
COMPLETED
Turn off the printer
↓ Turn OFF/ON
107
Not cleared.
Initial value
Not cleared.
Not cleared.
Initial value
TRANSMISSIVE
BATCH
203 dpi: 4 ips
300 dpi: 4 ips
RBN
BOTTOM
203 dpi: 76.0mm
300 dpi: 76.0mm
203 dpi: 74.1mm
300 dpi: 74.2mm
203 dpi: 104.0mm
300 dpi: 105.7mm
Not cleared