2. PRINTER SETUP
2.6.6 Initial Setting Wizard
THE first time the printer is used after opening carton box or after a RAM clear, the initial setting wizard
will start when the power is switched on. This wizard enables setting basic parameters, such as the LCD
language and print mode. The values set with this wizard can be changed in the system mode and also by
command.
Example of the Initial Setting Wizard Operation
1. Perform a RAM clear.
2 . The initial setting wizard
starts.
3. Select a language.
4. Print mode
5. Select a calibration type.
6.-1 When an option other than "OFF" is selected for CALIBRATE
ENGLISH VERSION
RAM clear with QM type
selected
QM TYPE
CLEAR...
↓
QM TYPE
COMPLETED
Turn off the printer
↓ Power OFF/ON
B-EX Series
Initializing...
↓
STARTUP SETTINGS
PRESS ENTER
↓ [ENTER] key
LANGUAGE
ENGLISH
▲
ENGLISH
GERMAN
FRENCH
▼
Select
ENTER:Set
↓ [ENTER] key
PRINT MODE
w/ RIBBON
▲
With RIBBON
Without RIBBON
▼
Select
ENTER:Set
↓ [ENTER] key
CALIBRATE
OFF
▲
OFF
LABEL/GAP
BLACK MARK
▼
Select
ENTER:Set
E2-18
Choose the desired option
with the [UP] or [DOWN] key
and press ENTER to set.
Choose
the
desiredoption
with the [UP] or [DOWN] key
and press ENTER to set.
Choose the desired option
with the [UP] or [DOWN] key
and press ENTER to set.
2.6 Printer Stting