Table of Contents
Advertisement
2.
Safety Instructions
2.1
Safety instructions
Follow the operating instructions.
Keep the operating instructions with the device.
Ensure that the device is operated only in a perfect condition.
Never open the device.
When opening the battery compartment, disconnect the power supply.
Ensure that only qualified personnel operate the device.
Connect the device only as specified.
Ensure that the device is operated only in the original condition.
Connect the device only with recommended accessories.
Ensure that the device is not operated outside the design limits. (See the technical data)
Ensure that the original accessories are not operated outside the design limits.
For measurements in short circuit resistant systems, ensure that voltage taps with integrated fuses
are used.
Do not use the device in environments where explosive gases, dust or fumes occur.
Clean the device only with commercially available cleaning agents.
DANGER!
Danger to life due to electric shock!
If the device is used in a way not specified by the equip-
ment producer, the device protection will be impaired.
Observe safety instructions
7
Advertisement
Table of Contents
Need help?
Do you have a question about the multilog 3 and is the answer not in the manual?