Table of Contents
Advertisement
5.
Intended use
The product is exclusively designed for the measurement and evaluation of voltages and currents. The
current inputs are mV-inputs.
Observe safety instructions
Ensure that the device is not operated above the rated data
6.
Description
The Network Analyzer multilog 3 is suitable for analysis in low, medium and high-voltage networks. It
meets all the requirements of the measurement equipment standard IEC61000-4-30
Functions:
→ Voltage quality measurements according to EN50160, IEC61000-2-2 and IEC61000-2-4 for
low and medium voltage networks
→ Fault recorder functions
→ Load analyses; energy measurements
→ Ripple control signal analysis
Ed. 3 class A.
17
Advertisement
Table of Contents
Need help?
Do you have a question about the multilog 3 and is the answer not in the manual?