Table of Contents
Advertisement
Troubleshooting
If your device seems to operate improperly, read this manual again, check the receiver battery and
replace it if necessary.
Try to initialize the receiver by removing the battery from the battery holder in the receiver, then use
a metal tool (e.g. a screwdriver, scissors, etc.) and short-circuit both contacts of battery holder for
approximately two seconds, and then put the battery back in its place observing the correct polarity.
A beep sound is emitted indicating the correct installation of the battery.
If the problem still persists, try to program the transmitter with receiver again according to the
instructions in this manual.
If the problem still persists, contact the dealer.
16
Short-circuit of the receiver
Advertisement
Table of Contents
