Table of Contents
Advertisement
Setup Utility
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6.
Confirm Yes is highlighted and press Enter. The system restarts.
• To enable the supervisor password or the user password when booting
up the computer, enable the Password On Boot.
• When entering the Setup Utility, the password will be required.
Changing the Password
1.
In the Security menu of the Setup Utility, select Set Supervisor password or Set
User password and press Enter.
2.
Type your current password, and press Enter.
3.
Type your new password, and press Enter.
4.
Type your new password again, and press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6.
Confirm Yes is highlighted and press Enter. The system restarts.
5
Deleting the Password
A deletion of the supervisor password will delete the user password.
1.
In the Security menu of the Setup Utility, select Set Supervisor password or Set
User password and press Enter.
2.
Type your current password, and press Enter.
3.
Without typing any characters, press Enter.
4.
Without typing any characters, press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6.
Confirm Yes is highlighted and press Enter. The system restarts.
5-6
Advertisement
Table of Contents
