Trouble When Starting - Sharp Actius PC-MC22 Operation Manual

Sharp actius pc-mc22: operation manual
Hide thumbs Also See for Actius PC-MC22:
Table of Contents

Advertisement

Troubleshooting

Trouble when Starting

Why doesn't the power indicator or the battery indicator turn on?
Make sure the AC adapter is correctly connected to the AC adapter jack of your
computer.
Make sure the AC power cable is correctly connected to a live wall outlet. To find
it is live or not, connect another electric equipment to the wall outlet.
Make sure the battery pack is correctly installed and charged.
If the battery pack is discharged, connect the AC adapter.
If all the steps above failed, follow the instructions on Why doesn't the keyboard or
the touchpad respond to your operation? on page T-3.
Why do I get the message Invalid system disk?
You may have inserted a non-bootable disk (either a defective disk or one without
an installed operating system) in the optional external floppy disk drive unit. Eject
the disk.
Why can't I boot from the floppy disk?
Make sure that the optional external floppy disk drive unit is correctly connected to
your computer.
Check whether the floppy disk set to the optional external floppy disk drive unit
contains a system disk.
Check whether USB Boot in the Boot menu of the Setup Utility is enabled. (Refer
to the Boot Menu section on page 5-7.)
Check whether Floppy Disk Drive is at the top in the Boot Sequence in the Boot
menu of the Setup Utility. (Refer to the Boot Menu section on page 5-7.)
Why do I get the message Operating System not found?
The message may appear when the installation has failed. Recover the C and D
drives using the created recovery CDs.
T-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-m4000 series

Table of Contents