Table of Contents
Advertisement
5.
Insert the Recovery CD disk 1 into the optical drive.
6.
In the Exit menu, select Load Setup Defaults; then, press Enter twice.
7.
In the Boot menu, confirm the Boot Sequence is highlighted and then, press
Enter.
8.
In the Boot Sequence, select the Optical Disk Drive and press the space bar to
place the Optical Disk Drive in the top of the list; then, press Esc.
9.
In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice.
10. Read the message on the screen, and select the way to recover your system; then,
press Enter. If you select Formats hard disk and creates new partition, go to the
next step. Otherwise, go to the step 12.
When you select Recovers both C: and D: drive or Formats hard disk and
creates new partition, the recovery process will delete the reinstallation
data stored in the hard disk. Therefore you will not be able to recover
your system from the hard disk.
11. Select the volume of C drive and press Enter.
12. Read the message and select Continue; then, press Enter. Follow the on-screen
instructions for replacing the recovery CD.
Although the pointer may be shown on the screen, never touch the
keyboard, the mouse or the screen during recovery except when the
message prompts you to. If you touch them, the reinstallation process
may be canceled.
13. After the recovery process is complete, the system will restart automatically.
When the message Press F2 for System Utilities appears, press F2. The Setup
Utility will open.
14. In the Exit menu, select Load Setup Defaults; then, press Enter twice.
15. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice. The system will restart.
16. Set up Windows, following the instructions on the screen.
17. Remove the recovery CD from the optical drive.
18. Make sure to set date and time.
Operation Manual
A-23
Advertisement
Table of Contents
