Table of Contents
Advertisement
The icon (
Creating Recovery CDs
1.
Connect the AC adapter to the computer.
Be sure to connect the AC adapter. If the battery is completely
discharged, the burning CD process will be stopped.
2.
Insert a blank CD-R into the optical drive.
If a dialog box or window appears, close it.
3.
Click start – All Programs – Create Product Recovery CD.
4.
In the Bootable CD Creator SE1.1 window, select the appropriate speed from the
Speed pull-down menu, then, click the Create Recovery Disc button.
5.
Read the message on the screen and then, click Yes, then, OK. The burning
process will start.
Never touch the keyboard, mouse or touchpad during the burning process
except when the message prompts you to do so. If you touch them, the
burning process may be stopped.
6.
Replace the CD-R by following the instructions on the screen. Label each CD-R
in the order of burning so that you will set them in correct order when recovering.
If a window or dialog box opens, close it.
7.
When you see the message Disc creation complete on the screen, click OK, then,
Close.
8.
Click Yes and remove the CD-R from the optical drive.
) will change to (
).
Operation Manual
A-21
Advertisement
Table of Contents
