Table of Contents
Advertisement
*2
Smaller value saves more power.
*3
The process will start after the specified time with no activity.
*4
The process will start after the specified time with no access to the hard disks.
*5
The White wallpaper covers the screen with white. Increasing the amount of white
area on the screen will reduce power consumption.
*6
60 Hz of the LCD refresh rate provides highest quality pictures and 40 Hz saves
power.
*7
If Mute is selected, a warning beep for critical or low battery power will not sound.
• Care should be taken when pressing the APM button while using the
optical drive or wireless LAN. Applying the mode where the Optical
drive or Wireless LAN is set to OFF will stop the current
reading/writing process or communication.
• To reset to the default setting values of the APM button, click start –
All Programs – SHARP Advanced Power Management Utility – Reset
to default.
Disabling System Standby/Hibernate
Before writing data onto a CD or communicating through the built-in modem, prevent
the computer from entering a system standby or system hibernation mode so that the
writing process or transferring will not be disturbed.
1.
Click start – Control Panel.
2.
Click Performance and Maintenance – Power Options. If the Classic view is
selected, double-click the Power Options icon.
3.
In the Power Schemes tab, select Always On in the Power schemes pull-down
menu.
4.
Confirm the System standby and System hibernates fields have Never.
5.
Click OK.
6.
Close the window.
Pressing the APM button after disabling system standby/hibernate
through the above process will apply the System standby or System
hibernate settings of the currently selected APM button mode.
Operation Manual
2
2-13
Advertisement
Table of Contents
