Sharp Actius PC-MC22 Operation Manual page 145

•
Close the applications currently opened.
•
Try to connect another ISP (Internet Service Provider), or try to connect in some
other time.
Why can't I access the LAN?
•
Confirm the cable is properly connected to the LAN jack and the network hub.
•
Confirm the network configuration is appropriate. (Refer to the Configuring the
LAN section on page 4-3.)
•
Confirm the user name or the password is correct.
•
Reconfigure the network settings by following the Network Setup Wizard.
Why can't I detect the wireless access point on my computer?
•
Confirm your computer is enabled for the wireless LAN communication.
•
Confirm the access point is powered on.
•
Confirm the antenna indicator is lit.
•
Restart your computer.
Why can't I connect to the network via an access point?
•
Confirm the wireless LAN antenna is enabled. When the antenna indicator lights
green, the antenna is enabled. If not, press the Fn+F1 (
•
Confirm Any available network (access point preferred) is selected in the Networks
to access field of the Advanced dialog box. (To open Advanced dialog box, refer to
the Communicating with Other Computers section on page 4-15.)
•
Confirm the Network name of your computer matches that of the access point you
want to communicate with.
•
Confirm the security settings of your computer equals to those of the access point if
the encryption security of the access point is enabled.
•
Reenter the Network key.
•
When using the WEP key, confirm the key index is correctly selected.
•
When you have more than one access points, your computer may be connected to
other than right one you want to access. Follow the steps below.
1. Right-click the Wireless Network Connection icon (
click View Available Wireless Networks.
Operation Manual
) keys.
) on the taskbar; then,
T-9