Sharp Actius PC-MC22 Operation Manual page 123

1. Open the Security Center and confirm all of the Firewall, Automatic Updates
and Virus Protection are ON.
• Be sure to enable all of these three functions.
• For details on the Security Center, refer to the Notice of Computer
Security on page xiv.
2. Scan the system for viruses.
• If some viruses are detected, eliminate them according to the
instructions of the virus protection/cleaner software.
• If no viruses are detected and the three functions are enabled, consult
the program publisher for an updated version.
Disabling DEP for Specific Programs
After ensuring the safety of the program, disable the DEP function to enable the
program execution.
To protect the computer, try to update the program and enable the DEP
function.
1. Follow the steps 1 to 5 of the Changing DEP Settings section on the previous
page.
2. Check the box of the program in the list to be run and then, click OK.
If the program is not on the list, click Add... and select the program to be
run.
3. Click OK.
If the confirmation window appears, click OK.
4. Click OK.
5. Restart the computer if prompted in the step 3.
Operation Manual
A-11