Table of Contents
Advertisement
Setting and Changing the Password
1.
Display the Setup utility Security menu.
2.
Select the Set Supervisor Password field and press the Enter key.
3.
Type in the supervisor password and press the Enter key. When changing the
password, type the new supervisor password.
4.
For confirmation, type the new supervisor password one more time and press
the Enter key.
5.
Press the Enter key. The setting of the item Supervisor Password is will
change to Enabled.
Note: To set the user password, select the Set User Password item, press
the Enter key, then follow steps 3 to 5 above to set the password or to
change it. The setting of the item User Password is will change to
Enabled. The user password can only be set if the supervisor password
has been set.
Passwords can be any combination of numbers and letters up to a maximum of 7
characters.
Deleting a Password
Follow the same procedure to set the password, but press the Enter key instead of
typing a password. The setting of the items Supervisor Password is and User
Password is will change to Disabled.
Note: When the supervisor password is deleted, the user password is
automatically deleted.
3-11
Advertisement
Table of Contents
