Sharp Actius PC-MC22 Operation Manual page 64

Battery and Power Management
Reconnecting the Optical Drive
To power on the optical drive and resume the connection, use one of the following
instructions. It will take some time for the optical drive to be recognized by the
computer after you complete one of the following:
•
Press the Fn key and hold it, then, press the F2 key.
•
Press the eject button of the optical drive.
2
The eject button does not work for reconnecting immediately after you
turn on the computer. Wait until Windows has booted up, and then, press
the eject button.
2-16
Eject Button