Table of Contents
Advertisement
If you type the user password when you enter the Setup Utility, you can set System
Time and System Date of the Main menu, Resolution Expansion of the Advanced
menu, and Set User Password of the Security menu only.
Setting the Password
1.
In the Security menu of the Setup Utility, select Set Supervisor Password or
Set User Password and press Enter.
2.
Type your password (up to eight characters), and press Enter.
3.
Type the same password again, and press Enter twice.
4.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
5.
Confirm Yes is highlighted and press Enter. The system restarts.
Changing the Password
1.
In the Security menu of the Setup Utility, select Set Supervisor Password or
Set User Password and press Enter.
2.
Type your current password, and press Enter.
3.
Type your new password, and press Enter.
6
4.
Type your new password again, and press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6.
Confirm Yes is highlighted and press Enter. The system restarts.
Deleting the Password
1.
In the Security menu of the Setup Utility, select Set Supervisor Password or
Set User Password and press Enter.
2.
Type your current password, and press Enter.
3.
Without typing any characters, press Enter.
4.
Press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter
6.
Confirm Yes is highlighted and press Enter. The system restarts.
6-6
Advertisement
Table of Contents
