Table of Contents
Advertisement
Setup Utility
Entering and Exiting the Setup Utility
1.
Turn on the computer.
2.
When Press F2 for System Utilities appears, press F2.
3.
Change to the desired settings. (Refer to the next section.)
4.
Select Exit menu; then, press Enter.
5.
Select one of the exit methods, and press Enter.
6.
Confirm the message and press Enter again. The system restarts.
When the Setup Utility is opened, power management does not work. Do
not close the display cover.
Changing the Settings of the Setup Utility
The touchpad and mouse are disabled in the Setup Utility. Use the
keyboard.
5
To change the settings:
1.
Use → or ← key to select the menu.
2.
Use ↑ or ↓ key to select the item.
Minus key or Space bar: Changes the value.
In the item with ►mark, press Enter to open a sub menu. Press Esc to close the
sub menu and return to the previous menu.
For date and time, press Enter on the item to select the value to be changed;
then, use the minus key or space bar to change the value.
3.
Close the Setup Utility referring to the steps in the Entering and Exiting Setup
Utility section.
5-2
Advertisement
Table of Contents
