Table of Contents
Advertisement
USB Devices
The computer has an interface called Universal Serial Bus (USB). Its two USB ports
support USB1.1 and USB2.0. With a USB connection, you can connect/disconnect
peripherals without turning off the computer. Generally, when you connect a device to
the computer, the necessary driver will be installed automatically. See also the
manuals of peripheral devices supporting USB.
When connecting the cable to one of the USB ports, be sure to keep the
USB mark (
When a new device is correctly connected to the computer, the
appropriate driver is automatically installed. If the driver is not installed
correctly, you will see a message on the screen. In this case, install the
driver by following the instructions on the screen.
USB Port
With the USB Mark
facing UP
To remove the USB devices, you may need to perform the following instructions.
1.
Click the Safely Remove Hardware icon (
the icon, click
step 3.
2.
Click Safely remove xxxx (xxxx is the name of your USB device); then, the Safe
To Remove Hardware dialog appears.
3.
Remove the device from the computer.
) side up.
to show all kinds of icons. If the icon does not appear, go to the
Operation Manual
) on the taskbar. If you cannot find
3
3-3
Advertisement
Table of Contents
