10.1 INTRODUCTION
A wide variety of multimeters or Volt Ohm Meters (VOM)
can be used for troubleshooting your equipment. This
section shows diagrams of a common, digital VOM con-
3121203
MULTIMETER BASICS
SECTION 10.
• If meter is not auto ranging, set it to the correct range (See
multimeter's operation manual)
• Use firm contact with meter leads
Figure 10-1. Voltage Measurement (DC)
T350 T500J
SECTION 10 - MULTIMETER BASICS
figured for several different circuit measurements. Instruc-
tions for your VOM may vary. Please consult the meter
operator's manual for more information.
10-214