JLG T350 Troubleshooting Manual page 138

SECTION 5 - SYSTEM TEST MESSAGES
5.41 CL LEVEL UP
System test prompt to close the Platform Levelling Up switch. Push the Platform Levelling switch at the ground panel to the
Up position to test the switch input and continue the test.
5.42 CL LIFT DOWN
System test prompt to close the Lift Down switch. Push the Lift switch at the ground panel to the Down position to test the
switch input and continue the test.
5.43 CL LIFT UP
System test prompt to close the Lift Up switch. Push the Lift switch at the ground panel to the Up position to test the switch
input and continue the test.
5.44 CL O/R SET
System test prompt to close the ground panel Outrigger Set switch. Push the Outrigger switch at the ground panel to the Set
position to test the switch input and continue the test.
5.45 CL O/R STOW
System test prompt to close the ground panel Outrigger Stow switch. Push the Outrigger switch at the ground panel to the
Stow position to test the switch input and continue the test.
5.46 CL START
ENGINE POWERED MACHINES ONLY
System test prompt to close the ground Start switch. Push the Start button at the ground panel to test the Start switch input
and continue the test.
5.47 CL START SWITCH
ENGINE POWERED MACHINES ONLY
System test prompt to close the platform Start switch. Push the Start button at the platform panel to test the Start switch
input and continue the test.
5.48 CL SWING LEFT
System test prompt to close the Swing Left switch. Push the Swing switch at the ground panel to the Left position to test the
switch input and continue the test.
5.49 CL SWING RIGHT
System test prompt to close the Swing Right switch. Push the Swing switch at the ground panel to the Right position to test
the switch input and continue the test.
5.50 CL TELE IN
System test prompt to close the Telescope In switch. Push the Telescope switch at the ground panel to the In position to test
the switch input and continue the test.
5-138 T350 T500J 3121203