Table of Contents
Advertisement
Lead-Ins and Lead-Outs
For proper machining of a contour, the laser should pierce the material outside of the cutting path and join
the contour as a lead-in. At the end of a contour the laser can be lead from the contour with a lead-out. The
optimal lengths and radius of leads depend on material and thickness.
Automatic Leads Function
Select the contours, and then select the command LeadLine in Home.
In the pop-up dialog, you can set geometry for lead-ins and lead-outs, set positions to place leads, set types
of contours to place leads onto, and set whether to check and correct geometry of leads automatically. Click
on OK, the software will place leads on contours according to the settings automatically.
rev_0.6
88 / 135
Advertisement
Table of Contents
