Object View Functions
The object view functions help you get more information from your drawing, i.e. if the contours are closed or
not, the start points of the cutting path, the processing sequence, etc.
Icon
Label
Show Box for unclosed
curve
Show unclosed curve as red
Index
Path Start
Show Path
Show Move Path
Center
rev_0.6
Function
To display surrounding boxes around unclosed contours.
To display unclosed contours in red.
To display processing sequence.
To display the start points of the cutting path.
To display the direction of the cutting path.
To display the traveling path.
Set the machine range to accommodate the drawing in the
center.
46 / 135