Table of Contents
Advertisement
Select the command
90°, 270° or 180° counter clockwise. If you want to rotate the objects with a self-defined rotation center and
angle, select the command
the command.
Drawing Functions
We will not cover too much details but general procedures about drawing functions in this section.
You can find all the drawing functions on the drawing toolbar or in the menu Draw, i.e. Line, Rectangle,
Circle, Polyline, Text, etc.
If you are familiar with some other CAD systems, e.g. AutoCAD, and get used to enter commands for drawing
parts, you can still do that in the Draw command window in CypCut, refer to
more information.
Here is a list of the drawing commands.
Menu
Button
Command
Line
Rectangle
RoundRect
Round
Circle
rev_0.6
90, the command
270 or the command
Rotate, and follow the prompts in the Draw command window to complete
Command
Function
Draw line segments.
line
Draw a rectangle.
rect
Draw a round rectangle.
rrect
Draw a special round rectangle with its sides replaced with half
round
rounds.
Draw a circle.
circle
180 to rotate the selected objects
Draw Command Window
for
63 / 135
Advertisement
Table of Contents
