Table of Contents
Advertisement
4. Assemble the guard rails.
The guard rails are meant to keep people from getting too close the potentially dangerous cutting area
while the machine is in operation.
5. Set the pick-up drawers.
The machine comes with two pick-up drawers, which to be placed under the front half and the rear half
of the cutting bed.
After processing, parts small enough to fit through the strip cutting bed will drop down to deep
collecting bays, avoiding damage by the laser during subsequent cutting operations. They can be
retrieved simply by pulling out the drawers after cutting is complete.
rev_0.6
18 / 135
Advertisement
Table of Contents
