Table of Contents
Advertisement
You can select the command Measure in the menu Home to measure the gap if you have no idea about the
dimension. Just follow the prompts in the Draw command window to complete the command.
Import into the Part Library
The software will also execute the default optimizations when importing parts directly into the part library.
Unlike importing into the drawing window, this function will not display anything in the drawing window and
will split drawing elements which are apart from each other into separate parts automatically.
For example, the drawing below will be imported as the two parts on the right side.
Here we will focus on discussing the possible issues you may encountered.
Let's try to import the handle (being used as an example in
Import into the Drawing
Window).
Unfortunately, you will get two unexpected parts in the library.
rev_0.6
55 / 135
Advertisement
Table of Contents
