Table of Contents
Advertisement
Nest Parts
After planing parts in the part library, you can do nesting. Click on the button
or on the menu icon
,
you will see the dialog Nest, where you can set parts, sheets and technology for nesting.
If there are parts selected in the library, the option Selected Parts will be enabled, you can check it to do
nesting on only the selected parts.
If there is no sheet in the library, only the option Standard plates will be enabled and checked, and you can
choose one from the standard sheets list. Otherwise, check the option All plates in Library to do nesting on
the sheets which fit the job best, or check the option Only Selected plates to do nesting on only the selected
sheets.
rev_0.6
70 / 135
Advertisement
Table of Contents
