Table of Contents
Advertisement
The circular array function is for laying out objects along with a circular path. Select the contours and then
select the command Circular Array in the pulldown-menu Home>Array.
In the pop-up dialog, check the option By Range and set the angular range for laying out in the option Array
range, or check the option By Interval and set the angular space between adjacent objects in the option
Degree, set the number of objects in the option Qty, click the button OK and left click the center of the
circular path you want to lay out the array on. The software will help you on that when the object snap
functions are enabled, refer to
Object Snap Functions
for more information.
rev_0.6
112 / 135
Advertisement
Table of Contents
