Sas Enable/Disable (X8Dtl-3/X8Dtl-3F Only); Sas Raid Mode Select (X8Dtl-3/X8Dtl-3F Only) - Supermicro SuperO X8DTL-3 User Manual

X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
SAS Enable/Disable (X8DTL-3/
X8DTL-3F only)
Jumper JPS1 allows you to enable or
disable the onboard SAS connections.
The default setting is Pins 1-2 to enable
the connection. See the table on the right
for jumper settings.
SAS RAID Mode Select (X8DTL-3/
X8DTL-3F only)
Jumper JPS2 allows you to select RAID
Confi guration settings for the onboard
SAS connections. See the table on the
right for jumper settings.
Note: For more information on LSI SAS RAID confi guration, please refer
to the LSI MegaRAID User's Guide posted on our website @ http://www.
supermicro.com/support/manuals/.
P2-DIMM3A
P2-DIMM2A
P2-DIMM1A
PHY
Chip
CPU2
X8DTL Series
LAN
CTRL
LAN
CTRL
Slot6 PCI-E 2.0 x8 (in x16 Slot)
Slot5 PCI-E 2.0 x4 (in x8 Slot)
W8379 5ADG
W8352 7HG
Slot4 PCI-E 2.0 x8
JPB
JP5
Slot3 PCI-E 1.0 x4
BMC CTRL
WPCM450-R
JI2C2
JPG1
J16
JI2C1
Slot2 PCI 33MHz
JWD JWOL
JD1
Slot1 PCI 33MHz
T-SGPIO1
COM2
Buzzer
BIOS
USB2/3 USB4/5 USB6
SP1
T-SGPIO2
FAN1/
JPW3 JPW2 CPU2 FAN
JPW1
CPU1
FAN2/
CPU1FAN
FAN3
P1-DIMM1A
P1-DIMM2A
P1-DIMM3A
Intel
5500
(North Bridge)
JOH1
LSI SAS1068E
Intel JBT1
ICH10R
(South Bridge)
Battery
JL1
3-SGPIO1
JBAT1
B
3-SGPIO2
JPS2
2-30
SAS Enable
Jumper Settings
Jumper Setting Defi nition
1-2 SAS Enabled (Default)
2-3 SAS Disabled
SAS RAID Confi g. Select
Jumper Settings
Jumper Setting Defi nition
Open Integrated Target Mode (IT)
Closed Software RAID (SR) (Default)
SAS Enable
A.
SAS RAID Config. Se-
B.
lect
A