Introduction; Overview; Equipment - ESAB ET 300i Instruction Manual

2 INTRODUCTION

2 INTRODUCTION
2.1

Overview

The ET 300i and ET 300iP are welding power sources intended for TIG welding and for
welding with covered electrodes (MMA).
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.2

Equipment

The power source is supplied with:
• Instruction manual
• 3 m (9.8 ft) mains cable with plug
• Gas hose for TIG welding, including hose clamps
• Return cable
0463 416 101 - 8 - © ESAB AB 2022