Deco
- tape saturation & doubletracker
MIDI Functionality
Configuring Deco to Use MIDI
Using MIDI unlocks a set of tools that can be used to load any of Deco's
300 preset locations using a suitable MIDI controller or interface con-
nected to the Deco EXP/MIDI jack� This requires a Strymon MIDI EXP
cable or a MIDI controller/interface, such as Strymon Conduit, with at
least one quarter-inch output�
NOTE: When using a Strymon MIDI EXP Cable, the MIDI OUT mode must be
� (See
set to Off
page 31
Please see
strymon�net/support/deco-v2
MIDI EXP cable
OR
MIDI Enabled Stompbox
MIDI Controller with
5-pin MIDI Outputs
for more info�)
for a list of compatible devices�
TRS cable
MIDI Controller with
1/4" TRS Output
1/4" TRS
MIDI Interface
(such as Strymon Conduit)
OR
pg 27