Table of Contents
Advertisement
External Control
Configuring UltraViolet for MultiSwitch Plus
Configure UltraViolet and MultiSwitch Plus for additional external
control�
1
Press and hold the UltraViolet footswitch while connecting power to
the pedal� Hold for at least 2 seconds, until the LED stops blinking�
2
Turn the SPEED knob all the way counter-clockwise to set the MIDI
CHANNEL to Channel 1� The LED should be GREEN�
3
Turn the INTENSITY knob to select the following MIDI OUT option:
• Send MIDI CC and Other Data:
• Send Other Data:
4
Turn the VOLUME knob all the way clockwise to set the EXP/MIDI jack
to MIDI Mode� The LED should be BLUE�
5
Press the UltraViolet footswitch to exit and store the MIDI CHANNEL,
the MIDI OUTPUT setting, and the EXP/MIDI Jack Mode�
6
Connect a TRS cable to UltraViolet's EXP/MIDI jack�
7
Press and hold the A footswitch on MultiSwitch Plus while connecting
the other end of the TRS cable to any one of the three jacks� The three
LEDs on MultiSwitch Plus will blink
footswitch�
GREEN
AMBER
mono
stereo
mono
stereo
IN
OUT
USB
EXP/MIDI
9VDC
GREEN
when you release the A
pg 16
Advertisement
Table of Contents
