Table of Contents
Advertisement
7.
Service
Service and maintenance work may only be performed by qualifi ed
personnel. Perform operational check of all safety systems and components
at each service. Only Enertech original parts should be used when replacing
components.
!
Use caution when operating the burner, surfaces may be hot.
Burner Service Schedule, Oil
7.1
Servicing must be carried out twice a year or after 3,000 hours of operation.
Burner
Filter
Oil hose
Nozzle
Electrodes
Brake disc
Motor
Drive shaft
Fan wheel
Tank
Oil fi lter
Oil valve
7.2
Component replacement intervals
Components
Control system
Pressure switch
Ignition system with fl ame guard
UV fl ame sensor
Damper motor
Contactor
The burner and its components must be recycled according to applicable regulations.
Twice a year
Twice yearly replacement
Once yearly replacement
Twice yearly replacement
Replace/Clean twice a year
Replace/Clean twice a year
Twice a year
Check/replace in the event of damage
Twice a year
Replace if need for cleaning/imbalance
Check for water once a year
Clean tank once a year
Twice a year
Leakage check twice a year
Service life – Recommended
replacement
10 years
10 years
10 years
10,000 h
10 years
3,000 h
3,000 h replacement
3,000 h replacement
Replace/Clean 3,000 h
Replace/Clean 3,000 h
3,000 h
Check/replace in the event of damage
3,000 h
Replace if need for cleaning/imbalance
3,000 h replacement
Replace if leaky
Service life – Recommended
replacement Operating cycles
250,000 cycles
250,000 cycles
250,000 cycles
N/A
500,000 cycles
500,000 cycles
165 405 08-2 2022-10-09
29
Bentone
Advertisement
Table of Contents
