Individual recipes
en
Programming a recipe
You can programme and save up to 5 preparation
phases.
1
Turn the function selector to the required type of
heating. Use the rotary selector to set the required
temperature.
The
i
symbol will be displayed.
2
Touch the
i
symbol.
3
Use the rotary selector to select a free memory
location.
4
Touch the
%
symbol.
5
Enter a name for the recipe in "ABC". ~
names" on page 18
6
Use the C symbol to select the first phase.
The initial type of heating and temperature are
displayed. You can change the type of heating and
the temperature using the rotary selectors.
7
Use the C symbol to select the time setting.
8
Set the required cooking time using the rotary
selector.
9
Use the C symbol to select the next phase.
- or -
If preparation is complete, finish making entries.
10 Save with ™.
- or -
'
Cancel with
and exit the menu.
Entering names
1
Enter the name of the recipe in "ABC".
18
Rotary selec-
tor
4
5
l
"Entering
Save with ™.
2
- or -
Cancel with
Note: For entering a name, Latin characters, certain
special characters and numbers are available.
Starting recipes
1
Set the function selector to any heating mode.
i
The
2
Touch the
select the required recipe.
3
Press I to start.
Operation starts. The cooking time starts counting
down in the display.
The settings for each phase are shown in the
display.
Notes
–
The cooking time does not start counting down until
the appliance has reached the set temperature.
–
You can use the rotary selector to change the
temperature while the recipe is in progress. This
does not change the saved recipe.
Select letters
A new word always begins with a capital let-
ter.
Press briefly: moves the cursor right
Press and hold: shifts to umlauts and spe-
cial characters
Press twice: accepts the change
Press briefly: moves the cursor right
Press and hold: shift to normal characters
Press twice: accepts the change
Deletes letters
'
and exit the menu.
symbol is displayed.
i
symbol. Use the rotary selector to