Http Client - Ebyte NB124S User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
broadcast on the entire network segment, but the sending and receiving devices need to ensure that
the ports are consistent, and ensure the device can also receive broadcast data.
【Note】In UDP mode, the data sent by the network to the device should be less than 512Bit per packet, otherwise
it will cause data loss.

4.4.5 HTTP client

This mode can realize HTTP automatic package function, and provides two methods of GET and POST.
Customers can configure URL, Header and other parameters by themselves, and the device will send the package to
realize fast communication between serial port data and HTTP server. URL and Header are the most The length
supports 128 bytes of data, and the two channels can independently open the HTTP client mode without affecting
each other.
The HTTP request data should be smaller than the packet length (512 bytes), otherwise the device will divide
the request data into multiple packets for request, resulting in abnormal request.
It supports configuring whether to return the HTTP protocol header, and the returned data is shown in the
figure below:
Copyright ©2012–2023，
Chengdu Ebyte Electronic Technology Co.,Ltd
NB124S_User Manual