Table of Contents
Advertisement
Accessories
Max. Length of Material in Racks: 6.0 m
Min. Length of Material in Racks: 2.4 m
6.2.2
Safety Precautions
Reduce platform capacity by 100 lb (45.5 kg) when installed.
Weight in racks plus weight in platform must not exceed rated capacity.
The maximum load in the racks is 180 lb (80 kg) evenly distributed between the
two racks.
The maximum length of material in racks is 20 ft (6.1 m).
•
Ensure no personnel are beneath the platform.
•
Do not exit platform over rails or stand on rails.
•
Do not drive machine without material secured.
•
Return racks to the stowed position when not in use.
•
Use this option only on approved models.
6.2.3
Preparation and Inspection
•
Ensure racks are secured to the platform rails.
•
Replace torn or frayed tie-down straps.
6.2.4
Operation
1. To prepare racks for loading, remove locking pins, rotate each rack 90 degrees
from stowed to working position, then secure with locking pins.
2. Loosen and remove tie-down straps. Place material on racks with weight evenly
distributed between both racks.
3. Route the tie-down straps at each end across loaded material and tighten.
94
WARNING
WARNING
NOTICE
NOTICE
31219187
EC450AJ, EC520AJ
Advertisement
Table of Contents
