Table of Contents
Advertisement
Safety Precautions
•
Do not assist a stuck or disabled machine by pushing or pulling except by pulling at
the chassis tie-down lugs.
•
Fully lower platform and shut off all power before leaving machine.
•
Remove all rings, watches, and jewelry when operating machine. Do not wear loose
fitting clothing or long hair unrestrained which may become caught or entangled in
equipment.
•
Persons under the influence of drugs or alcohol or who are subject to seizures,
dizziness or loss of physical control must not operate this machine.
•
Hydraulic cylinders are subject to thermal expansion and contraction. This may result
in changes to the platform position while the machine is stationary. Factors affecting
thermal movement can include the length of time the machine will remain
stationary, hydraulic oil temperature, ambient air temperature, and platform
position.
1.3.2
Trip and Fall Hazards
•
Before operating the machine, ensure all gates are closed and fastened in their
proper position.
•
During operation, occupants in the platform must wear a full body harness with a
lanyard attached to an authorized lanyard anchorage point. Attach only one (1)
lanyard per lanyard anchorage point.
•
Enter and exit only through gate area. Use extreme caution when entering or leaving
platform. Ensure that the platform assembly is fully lowered. Face the platform when
entering or leaving the platform. Always maintain "three point contact" with the
machine, using two hands and one foot or two feet and one hand at all times during
entry and exit.
16
31219187
EC450AJ, EC520AJ
Advertisement
Table of Contents
