Emergency Procedures
4. Using a 5/16 inch allen wrench, install the brake release screw into the hub.
5. Repeat steps 2 - 4 for the remaining drive hubs.
6. Connect suitable equipment, remove chocks, and move machine.
After moving machine, complete the following procedure:
1. Position machine on a firm level surface.
2. Chock wheels securely.
3. Using a 5/16 inch allen wrench, remove the brake release screw from each hub.
4. Replace each brake release screw with the corresponding cap retaining screw and
return the brake release screws to the turntable.
5. Remove chocks from wheels as desired.
88
31219187
EC450AJ, EC520AJ