Advertisement
Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM DOWEL
Cam Dowel
Arrow
Metal end
Hidden Cam
3.
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Step 1
å
Assemble your unit on a carpeted floor or on the
empty carton to avoid scratching your unit or the floor.
å
Push twelve HIDDEN CAMS (1F) into the
BACKS (F and L). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM.
2F
Arrow
Metal end
Page 6
1.
Start
Arrow
1F
Arrow
1F
Metal end
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the edge
of the board.
Tighten
Maximum
210 degrees
Minimum
190 degrees
Do not tighten the HIDDEN CAMS in this step.
L
2F
2.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
Arrow
Arrow
1F
F
2F
Metal end
Advertisement
