Advertisement
Quick Links
1800 Low Reception
Hutch
Hudson Elm finish | Model 5427455
Teknik
www.teknikoffice.co.uk
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS
IMPORTANT SAFETY
INFORMATION.
PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
English pg 1-15
Français pg 16-18
Español pg 19-21
Lot # 574109
Purchased:
__________________
12/22/21
Advertisement
Related Manuals for Teknik 5427455
Summary of Contents for Teknik 5427455
- Page 1 1800 Low Reception NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Hutch PLEASE READ AND KEEP FOR FUTURE REFERENCE. Hudson Elm finish | Model 5427455 English pg 1-15 Français pg 16-18 Español pg 19-21 Lot # 574109 12/22/21 Purchased: __________________...
- Page 2 Table of Contents Assembly Tools Required Hardware Identification No. 2 Phillips Screwdriver Part Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 5-15 Hammer Not actual size Français 16-18 Español 19-21 Safety Warranty Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 42F WOOD DOWEL - 16 41G PLATE - 2 10M TOUCH-UP PEN - 1...
- Page 3 Now you know Part Identification our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. RIGHT END (1) LEFT END (1) LONG TOP (1)
- Page 4 Hardware Usage Guide HOW TO USE A TWIST-LOCK FASTENER ® Push a TWIST-LOCK® FASTENER 1. Insert the dowel end of the FASTENER into the into the large hole in the part. hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
- Page 5 Step 2 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Insert three WOOD DOWELS (42F) into the SHORT BACK (F) exactly as shown. å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. å...
- Page 6 Step 3 å Insert five WOOD DOWELS (42F) into the ENDS (A and B), UPRIGHT (E), and SHORT BACK (F). Just think. The sooner you do this, the sooner å NOTE: You may need to gently tap the WOOD DOWEL in you do something else.
- Page 7 Step 4 å Your 427455 Reception Hutch can be fastened to a Desk/Credenza and Desk Return combo in either orientation. 4 2 7 4 1 3 4 2 2 4 2 7 Page 8...
- Page 8 Step 5 å This unit is made to sit on the 427422 Desk/Credenza and the 427413 Desk Return. Open the TAPE CARD/PREP PAD KIT (182M) and open the Alcohol Prep Pad to wipe the top surface of the Desk and Return as shown in the diagram. å...
- Page 9 Step 6 å IMPORTANT: The Reception Hutch cannot be moved after it is set in place. Pre-plan the Reception Hutch placement, then place it completely on the STOP attaching surface. The Reception Hutch Caution å cannot be moved after it With the help of another person, carefully center the Reception Hutch is set in place.
- Page 10 Step 7 å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (125P) onto each visible TWIST-LOCK® FASTENER. å For long-term care and maintenance of your unit, you may touch up the edges with the TOUCH-UP PEN (10M). å NOTE: Please read the back pages of the instruction booklet for important safety information. å...
- Page 11 Step 8 å Insert two WOOD DOWELS (42F) into the BACKS (F and G). Just think. The sooner you do this, the sooner å NOTE: You may need to gently tap the WOOD DOWEL in you do something else. with your hammer. å...
- Page 12 Step 9 å Insert one WOOD DOWEL (42F) into the RIGHT END (A). å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. å Fasten the RIGHT END (A) to the SHORT BACK (F). Tighten two TWIST-LOCK® FASTENERS. å...
- Page 13 Step 10 å Insert one WOOD DOWEL (42F) into the SHORT BACK (F). å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. å Fasten the SHORT BACK (F) to the LONG BACK (G). Tighten two TWIST-LOCK® FASTENERS. å...
- Page 14 Step 11 å Insert eleven WOOD DOWELS (42F) into the ENDS (A and B), UPRIGHTS (E), and BACKS (F and G). å NOTE: You may need to gently tap the WOOD DOWEL in with your hammer. (11 used) Page 15...
- Page 15 Step 12 å Fasten the PLATES (41G) to the LONG TOP (C). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 16...
- Page 16 Step 13 å Fasten the LONG TOP (C) to the RIGHT END (A), UPRIGHT (E), and BACKS (F and G). Tighten nine TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the RIGHT END, UPRIGHT, and BACKS insert into the LONG TOP. Page 17...
- Page 17 Step 14 å Fasten the SHORT TOP (D) to the LEFT END (B), UPRIGHT (E), and LONG BACK (G). Tighten six TWIST-LOCK® FASTENERS. å NOTE: Be sure the WOOD DOWELS in the LEFT END, UPRIGHT, and LONG BACK insert into the SHORT TOP. å...
- Page 18 Step 15 å Your Reception Hutch can be fastened to the 427422 Desk/Credenza and 427413 Desk Return Almost time to combo in either orientation. celebrate! With a nap. Page 19...
- Page 19 Step 16 å Carefully lay your unit onto its back edges. å This unit is made to sit on the 427422 Desk/Credenza and the 427413 Desk Return. Open the TAPE CARD/PREP PAD KIT (182M) and open the Alcohol Prep Pad to wipe the top surface of the Desk and Return as shown in the diagram.
- Page 20 Step 17 å IMPORTANT: The Reception Hutch cannot be moved after it is set in place. Pre-plan the Reception Hutch placement, then place it completely on the STOP attaching surface. The Reception Hutch Caution å cannot be moved after it With the help of another person, carefully center the Reception Hutch is set in place.
- Page 21 Step 18 å Using your hammer, gently tap a TWIST-LOCK® FASTENER COVER (125P) onto each visible TWIST-LOCK® FASTENER. å For long-term care and maintenance of your unit, you may touch up the edges with the TOUCH-UP PEN (10M). å NOTE: Please read the back pages of the instruction booklet for important safety information. å...