Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Teknik Manuals
  4. Indoor Furnishing
  5. 5426135
  6. Instructions manual

Teknik 5426135 Instructions Manual

Home study 3 shelf bookcase
Hide thumbs

Advertisement

Quick Links

Download this manual
Home Study 3 Shelf Bookcase
Model 5426135
Teknik
www.teknikoffice.co.uk
The stories of your life.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.

Advertisement

loading

Related Manuals for Teknik 5426135

Summary of Contents for Teknik 5426135

  • Page 1 Teknik www.teknikoffice.co.uk The stories of your life. Home Study 3 Shelf Bookcase NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Model 5426135 PLEASE READ AND KEEP FOR FUTURE REFERENCE.
  • Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 6-32 Hammer Not actual size Page 2...

  • Page 3: Part Identification

    Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. END (2) LEFT FRONT/RIGHT REAR LEG (2) ADJUSTABLE SHELF (1)

  • Page 4: Hardware Identification

    Hardware Identifi cation HIDDEN CAM - 36 CAM DOWEL - 24 CAM SCREW - 12 WOOD DOWEL - 6 14H HINGE - 4 WASHER - 2 DOOR STOP - 2 PULL - 2 100P RUBBER SLEEVE - 4 NAIL - 30 APPLIQUE CARD - 5 METAL PIN - 4 FURNITURE TIPPING...
  • Page 5 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. BLACK 1/2" FLAT HEAD SCREW - 8 BROWN 1-1/2" FLAT HEAD SCREW - 7 BLACK 9/16" FLAT HEAD SCREW - 12 SILVER 1/4" MACHINE SCREW - 2 113S BLACK 1-15/16"...
  • Page 6 Hardware Usage Guide HOW TO USE A HIDDEN CAM & CAM DOWEL Insert the metal end of the CAM DOWEL into the HIDDEN CAM. Cam Dowel Cam Dowel Arrow Hole Hole Push a HIDDEN CAM into Metal end the part. The arrow in the HIDDEN CAM must point toward the hole in the Hidden Cam...
  • Page 7 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push fi ve HIDDEN CAMS (1F) into the UPPER BACKS (P) å and a UPPER LEG (E). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
  • Page 8 Step 2 Open the FURNITURE TIPPING RESTRAINT KIT (97) å Caution and fasten the SAFETY STRAP to the TOP (B). Use the provided BLACK 9/16" LARGE HEAD SCREW. Do not stand the unit upright without the BACK fastened. The unit may collapse. NOTE: Position the SAFETY STRAP exactly as shown.

  • Page 9: Hidden Cam

    Step 3 Push four HIDDEN CAMS (1F) into a UPPER FIXED SHELF (M). å Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Arrow Do not tighten the HIDDEN CAMS in this step. Metal end (4 used) Arrow Metal end...
  • Page 10 Step 4 Fasten a UPPER FIXED SHELF (M) to the LEG (E). Tighten å one HIDDEN CAM. Just think. The sooner you do this, the sooner you do something else. i t h o f a c S u r D E N H I D Page 10...
  • Page 11 Step 5 Push one HIDDEN CAM (1F) into a LEG (E). Then, insert the å metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow Metal end (1 used) Page 11...
  • Page 12 Step 6 Fasten the LEG (E) to the TOP (B) and UPPER å FIXED SHELF (M). Tighten two HIDDEN CAMS. Surface with HIDDEN CAMS Page 12...
  • Page 13 Step 7 Push four HIDDEN CAMS (1F) into the UPPER FIXED SHELF (M). Then, insert the å metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Fasten the UPPER FIXED SHELF (M) to the LEGS (E). Tighten two HIDDEN CAMS. å...
  • Page 14 Step 8 Push two HIDDEN CAMS (1F) into the remaining LEGS (E). å Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Fasten the LEGS (E) to the TOP (B) and UPPER FIXED å SHELVES (M). Tighten six HIDDEN CAMS. Arrow Metal end (2 used)
  • Page 15 Step 9 Fasten the LOWER FIXED SHELF (Q) to the LEGS (E) å and UPPER BACKS (P). Use eight BLACK 1-15/16" FLAT HEAD SCREWS (113S). 113S BLACK 1-15/16" FLAT HEAD SCREW (8 used in this step) o l e e r h f e w i t h f a c...
  • Page 16 Step 10 Carefully stand your unit on its top surface. å Tighten the four HIDDEN CAMS in the UPPER BACKS (P). å (20 used) To cover screws Push two DOOR STOPS (4I) into the LOWER FIXED SHELF (Q). å Fasten the UPPER BACKS (P) to the UPPER FIXED SHELVES (M). å...
  • Page 17 Step 11 Fasten the MOLDINGS (C and D) to the TOP (B). Use seven å BROWN 1-1/2" FLAT HEAD SCREWS (14S). Peel APPLIQUES from the APPLIQUE CARDS (100P) and å stick them onto each visible SCREW head. (7 used) 100P To cover screws BROWN 1-1/2"...
  • Page 18 Step 12 Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into the END (A) until the shoulders of the SCREWS rest on the surface å of the END. NOTE: Do not overtighten the SCREWS. å Slide the MOLDING (K) onto the END (A). Line up the grooves in the MOLDING over the heads of the SCREWS in å...
  • Page 19 Step 13 Slide the MOLDING (J) onto the END (A). Line up the å grooves in the MOLDING over the heads of the SCREWS Now might be a in the END. good time to refresh your drink. NOTE: The MOLDING should be even on both edges of å...
  • Page 20 Step 14 Push eight HIDDEN CAMS (1F) into a END (A) å Repeat this step for the remaining END. å Arrow Arrow Arrow Page 20...
  • Page 21 Step 15 Turn six CAM SCREWS (8F) into the LEGS (F and G). å Insert two WOOD DOWELS (15F) into the LEGS (F and G). å Repeat this step for the remaining LEGS. å Page 21...
  • Page 22 Step 16 Fasten the LEGS (F and G) to the END (A). Tighten six å HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the LEGS insert å into the END. Repeat this step for the remaining END. å These surfaces The LEGS will should be even.
  • Page 23 Step 17 Carefully turn your unit on its front edges. å Insert the metal end of a CAM DOWEL (2F) into each å HIDDEN CAM on the short edges of the ENDS (A). Fasten the ENDS (A) to the LOWER FIXED SHELF (Q). å...
  • Page 24 Step 18 Push four HIDDEN CAMS (1F) into the BOTTOM (H). å Then, insert the metal end of a CAM DOWEL (2F) into Arrow each HIDDEN CAM. Insert two WOOD DOWELS (15F) into the BOTTOM (H). å Slide the BOTTOM MOLDING* (O) onto the notched edge å...
  • Page 25 Step 19 Fasten the BOTTOM (H) to the ENDS (A). Tighten four å HIDDEN CAMS. i t h f a c S u r D E N H I D Page 25...
  • Page 26 Step 20 Unfold the LOWER BACK (S) and lay it over your unit. å Caution Make equal margins along the two side edges of the LOWER BACK (S). å Do not stand the unit upright The bottom edge of the LARGE BACK (S) and bottom surface of without the BACK fastened.

  • Page 27: Installation Instructions

    Step 21 Carefully stand your unit upright in its fi nal location. We recommend using the SAFETY STRAP for added stability. å NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY STRAP to a wall å...
  • Page 28 Step 22 Push the RUBBER SLEEVES (2R) over the METAL å PINS (1R). Insert the METAL PINS into the hole locations of your choice in the ENDS (A). Set the Hey! It's starting to look like something! ADJUSTABLE SHELF (N) onto the METAL PINS. (4 used) Page 28...
  • Page 29 Step 23 Fasten two HINGES (14H) to a DOOR (R). Use four BLACK å 1/2" FLAT HEAD SCREWS (11S). Repeat this step for the remaining door. å BLACK 1/2" FLAT HEAD SCREW (8 used in this step) Page 29...
  • Page 30 Step 24 Before fastening the DOOR to your unit, be sure the mounting screw is against the stops as shown in the right diagram. If å it isn't, loosen the adjusting screw and mounting screw to slide it against the stops. Then tighten the mounting screw. Fasten the DOOR (R) to the END (A) as shown in the lower diagram.

  • Page 31: Door Adjustments

    Step 25 Refer to the enlarged diagram to identify the parts on the HINGES. å The DOORS may need some adjustments. Follow the text below to make needed adjustments. å DOOR ADJUSTMENTS: å To adjust the DOORS from side to side (horizontal), turn the adjusting screw in or out. To adjust the DOORS up and down (vertical), loosen both vertical adjustment screws.
  • Page 32 Step 26 Peel APPLIQUES from the APPLIQUE CARDS (100P) and stick them onto each visible HIDDEN CAM å NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. å...
  • Page 33 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. •...