Related Manuals for Teknik Clifton Place 5421116
Summary of Contents for Teknik Clifton Place 5421116
- Page 1 Teknik www.teknikoffice.co.uk For things 'n such. Hutch Clifton Place Collection | Model 5421116 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-14 Hammer Not actual size Français 15-17 Español 18-20 Electric drill with 1/4" bit (ONLY in indicated step) Safety 21-22 Warranty...
-
Page 3: Part Identification
Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT END (1) LEFT END (1) TOP (1) -
Page 4: Hardware Identification
Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. CAM SCREW - 4 WOOD DOWEL - 4 HIDDEN CAM - 4 SHORT WOOD BACK CONNECTOR - 6 METAL PIN - 8 RUBBER SLEEVE - 8 DOWEL - 4 APPLIQUE CARD - 1 BRACKET - 2... - Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Insert four HIDDEN CAMS (1) into the TOP (C). å Arrow (4 used) The arrow in the HIDDEN CAM must point toward the hole in the edge of the board.
- Page 6 Step 2 Insert four WOOD DOWELS (3) into the ENDS (A and B). å Turn four CAM SCREWS (2) into the ENDS (A and B). å Insert four SHORT WOOD DOWELS (4) into the MOLDINGS (E). å Page 6...
- Page 7 Step 3 Fasten the MOLDINGS (E) to the TOP (C). Use six BLACK å 1-1/8" FLAT HEAD SCREWS (11). Remember: Righty tighty. NOTE: Be sure the SHORT WOOD DOWELS in the å Lefty loosey. MOLDINGS insert into the TOP. BLACK 1-1/8" FLAT HEAD SCREW (6 used in this step) Groove Page 7...
- Page 8 Step 4 Fasten the TOP (C) to the LEFT END (B). Tighten two å HIDDEN CAMS. NOTE: Be sure the WOOD DOWEL in the LEFT END å inserts into the TOP. Unfold the BACK (H) and slide the BACK into the grooves å...
- Page 9 Step 5 Place the BRACE (D) onto the WOOD DOWEL in the LEFT END (B). å NOTE: Be sure the BACK inserts into the groove in the BRACE. å Fasten RIGHT END (A) to the TOP (C). Tighten two HIDDEN CAMS. å...
- Page 10 Step Step 6 Carefully turn your unit over onto its front edges. å Caution Fasten the ENDS (A and B) to the BRACE (D). Use two BLACK å Do not stand the unit upright without the 1-1/2" FLAT HEAD SCREWS (10). BACK fastened.
- Page 11 Step Step 7 Carefully turn the Hutch over onto its back. å If you are fastening the Hutch to the 421114, Lateral File, you will need to complete Steps 1-18 in the 421114 å book before fastening the Hutch to the Lateral File Top. If you are fastening the Hutch to the 421115, Library Base, you will need to complete Steps 1-10 in the 421115 å...
- Page 12 Step Step 8 With someone's help, fasten the Library Base Top to the å Library Base Assembly. Tighten six HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the Library Base Top å insert into the Library Base. NOTE: If needed, follow the 421114 or 421115 instruction book å...
- Page 13 Step Step 9 Finish fastening the Hutch to the Library Base. Use two å BRACKETS (9) and eight BLACK 1" PAN HEAD SCREWS (12). BLACK 1" PAN HEAD SCREW (8 used in this step) Page 13...
- Page 14 Step Step 10 We recommend using the FURNITURE TIPPING RESTRAINT KIT (99) for added stability. Fasten a bracket to the back å edge of the TOP (C) using the 5/8" screw as shown. Place your unit in its fi nal location against a wall. å...
- Page 15 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. •...